Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateFast, Reliable Garage Door Repair Across Cameron Park
Garage door repair in Cameron Park typically runs $150 – $600, and most jobs of the common failure types can be done in a single visit. The town’s mix of 1960s – 1990s ranch homes and rural-residential acreage means we’re looking at oversized doors, heavier springs, and west-facing panels that take a beating from the foothill sun. Our techs know the difference between a tract-home service call and a canyon-side property off a county road. If your door is stuck, sagging, or refuses to stay up, call All Star Garage Door Co at (855) 684-6988. We diagnose the actual fault before quoting a dollar of work.
Why All Star Garage Door Co Is Cameron Park’s Preferred Garage Door Repair Company
Garage doors are the only thing we work on. That single-trade focus is why Cameron Park homeowners call us when a spring snaps or an opener quits: we’re not a general handyman trying to fit a door job between a bathroom remodel and a water heater swap. Troy Winslow, who leads our team, has built the company around one standard: every tech is a garage door specialist, not a rotating apprentice. When you describe a symptom on the phone, the person you’re talking to knows what a failing torsion spring sounds like and what a stripped opener gear feels like through your description. That’s the difference a dedicated Garage Door Repair company brings.
We also know Cameron Park’s specific housing stock. Homes here trend toward larger two-car and RV-capable garages on generous lots, which puts a heavier load on springs and openers than the standard tract doors you see down the hill in Folsom. A crew that mostly services cookie-cutter suburbia won’t carry high-cycle springs rated for oversized doors. We do. And because Cameron Park sits along the Highway 50 corridor, our techs can reach most neighborhoods quickly without a Sacramento-length drive. When you call, you get a straight answer about what we think is wrong and what it’ll cost to fix.
Styles & brands we work with
Commercial Garage Door Repair in Cameron Park
Commercial Garage Door Repair in Cameron Park usually means one of two setups: a detached workshop or barn-style outbuilding on a rural-residential parcel, or a small commercial or HOA facility with a high-use door. These jobs differ from residential work because the doors cycle more often, the hardware is heavier, and downtime actually costs the owner something real. Most commercial-spec repairs here fall in the $150 – $600 range, depending on what failed. The right fix is usually less than a replacement, and a specialist can tell which one you’re facing in the first fifteen minutes on site.
High-Cycle Hardware and Oversized Door Service
Workshop doors on Cameron Park acreage lots get cycled daily and often have to lift doors that are wider and heavier than anything a standard suburban home carries. That means the springs, drums, and cables need to be spec’d for the door’s actual weight and cycle count, not whatever the original installer had on the truck. We service LiftMaster and Genie commercial-style openers and can source or carry the high-cycle springs these doors need.
If the door is running rough, reversing, or leaving one side sitting lower than the other, that’s a hardware problem, not a normal “it’s old” condition. We inspect the full system before quoting, so you know whether you’re paying for one cable or a new pair of springs and a realignment.
Garage Door Cable Repair in Cameron Park
Garage Door Cable Repair in Cameron Park tends to present as a door that’s suddenly crooked, dragging, or dropped hard on one side. Cables on the town’s heavier doors, especially the oversized two-car and RV-capable units, fail when rust, fraying, or a snapped spring lets the door’s full weight land on a single cable and drum. That’s a dangerous condition. A cable repair in Cameron Park typically runs $130 – $250, and we carry the cables and drums for most Chamberlain, Genie, and Clopay setups so a single call solves it. We never tell a homeowner to adjust or remove these cables themselves; the stored torsion is enough to cause serious injury.
Sectional Door Cable and Drum Re-Wrapping
When a cable jumps off a drum, the door doesn’t lift evenly and the sections bind on the track. That’s common on Cameron Park doors that sit facing west or southwest: summer heat and UV can warp a panel just enough that the door catches mid-cycle and the opener yanks the cable off. Our fix is to re-seat or replace the cable, check the drum, and then correct whatever caused the jump in the first place. We don’t do partial fixes that fail again in six weeks.
Spring and Cable Failures on Original Doors
Many Cameron Park homes still have their original 1970s – 1990s garage doors, and on those systems the springs and cables usually hit the end of their service life together. If one spring has snapped and the other is original, we’ll recommend replacing both springs and inspecting cables, because the surviving spring is on borrowed time and the cables have been carrying more than their share. The quote is always discussed and agreed before any work starts.
Trusted Brands We Service in Cameron Park
We work on the equipment you already own, across the brands found throughout El Dorado County. Chamberlain and LiftMaster are the most common openers in Cameron Park garages, and we carry or can get their parts quickly. Door brands on the foothill lots run heavily to Clopay, Amarr, and older Wayne Dalton units, all of which we service. We don’t push replacement when a repair makes more sense. Our trucks are stocked for the failures we see most on Cameron Park’s oversized and weathered doors, so most calls are resolved in one trip.
See the difference
Before
After
Before
After
Before
AfterCommon Garage Door Repair Problems We See in Cameron Park Homes
- Sun-baked warping on west-facing panels. Cameron Park’s afternoon sun at 1,200 – 1,400 feet heats doors well past what valley garages experience, and wood and early steel panels warp out of plane, causing binding, sensor faults, and uneven closing. We see this on doors facing southwest across the town’s open driveways more than anywhere else we work.
- Fatigued springs on oversized and RV-capable doors. The acreage properties off roads like Oxford Road and Cambridge Road often have heavy two-car or RV doors that cycle the same spring far harder than a standard door. Tired torsion springs show up as an opener that strains, reverses, or trips its overload.
- Cold-weather opener trouble in winter. At this elevation, Cameron Park gets sharp cold snaps that stiffen rail lubrication and make openers work harder, especially on detached garages and workshops with no climate control. Brittle weatherstripping cracks and lets debris into the track and around the cables.
- Misaligned photo-eye sensors on old tracks. Older doors with original track and hinges shift over the years, and once a track is out of square, the sensors near the floor get knocked out of line. The door reverses for no apparent reason. It’s rarely a sensor problem; it’s a track alignment problem.
We were called out to a ranch property off Knollwood Drive where a west-facing oversized two-car door had baked through another foothill summer and the wood panels were warped enough that the photo-eye sensors kept getting knocked out of line on the way down. Our tech found a fatigued torsion spring with visible spring cycles behind the failure, replaced it with a high-cycle spring, re-leveled the track alignment and drums, and swapped the scorched weather seal. One trip, door balanced and running smooth.
Pricing for Garage Door Repair in Cameron Park, CA
Here’s what Cameron Park homeowners can expect to pay for the most common repairs. These are the ranges we quote before any work begins, and the final price is agreed before we put a tool on the door.
| Repair Type | Typical Cost in Cameron Park |
|---|---|
| Spring Repair | $180 – $340 |
| Cable Repair | $130 – $250 |
| Opener Repair | $120 – $320 |
| Track Realignment | $120 – $240 |
| Panel Replacement | $250 – $500 |
| General Garage Door Repair | $150 – $600 |
Cost is driven by door weight, the number of springs, and whether the hardware is original. Oversized doors on acreage lots often need heavier springs than a standard two-car door, which can push the spring job toward the top of the range. Estimates are free. Call (855) 684-6988 and we’ll give you a real number before you commit.
We Also Serve Cities Near Cameron Park
Our Garage Door Repair in Cameron Park service area also reaches the surrounding foothill and valley communities. We regularly handle calls in El Dorado Hills, Folsom, Rancho Murieta, and Granite Bay. If your garage door is acting up and you’re anywhere along the Highway 50 corridor, call us and ask.
Serving Cameron Park, CA — Our Local Coverage Area
We’re based in the Cameron Park area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Garage Door Repair in Cameron Park
Yes. We carry and source high-cycle torsion springs rated for the oversized two-car and RV-capable doors found on Cameron Park’s rural-residential and acreage parcels. Standard springs on a heavy door fail faster, so we spec the spring to the door’s weight and your usage. Call (855) 684-6988 for a quote on the specific spring your door needs.
Depends on the extent of the warp and where the section sits. If one or two panels are warped out of plane, we can often replace just those panels for $250 – $500 for the section, provided the door frame and tracks are still sound. If the whole door face is heat-stressed and the structure is gone, replacement makes more sense. We’ll show you the numbers for both before you decide.
Usually the springs. An opener on a heavy Cameron Park double or RV door is only designed to move a balanced door. When the torsion or extension springs are tired, the opener does all the lifting itself, and you’ll hear it strain, see it slow, or watch it reverse. Replacing the springs typically runs $180 – $340 and fixes it. If the opener has also been damaged from running against a heavy door, we’ll tell you and quote both.
Yes, that’s some of the most common work we do on Cameron Park properties with detached workshops and outbuildings. Workshop doors run more cycles and carry heavier panels, so cables, drums, and springs wear out faster than on a house door. Cable repair runs $130 – $250, and we inspect the drums and springs at the same time so you’re not paying for a repeat visit.
At this elevation, winter nights dip cold enough to stiffen the lubrication on old opener rails and make plastic gears brittle. Doors on detached garages are worse because there’s no house heat bleeding into the space. A cold snap can make an already-tired opener bind, strain, or strip its gear. We see it every winter. If your door is louder in the cold or stops mid-cycle, get it checked before total failure.
For garage door repair in Cameron Park, CA, call All Star Garage Door Co at (855) 684-6988. We’ll get a specialist to your door with the parts to fix it. Written quotes, agreed before any work starts, and free estimates on every call.
Written by Troy Winslow, Owner at All Star Garage Door Co, serving Cameron Park and surrounding El Dorado County communities.