Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateFast, Reliable Garage Door Repair Across Loomis
Garage door repair in Loomis typically runs $150 – $600, with spring repair at $180 – $340 and cable repair at $130 – $250. Most jobs on this side of Placer County involve oversized doors on large properties, which means heavier hardware and springs that work harder than anything you’d find in a tract-home subdivision. We know the difference, and we plan for it. If your door is making noise, sitting crooked, or refusing to open, call (855) 684-6988 and we’ll get a technician out to your place.
Loomis isn’t a one-size-fits-all market. Between the older ranch-style homes along Horseshoe Bar Road, the newer custom estates climbing toward Penryn, and the horse properties spread across the 95650 zip code, every job looks a little different. What ties them together is the heat. Summer afternoons out here push 100°F and hotter, and that takes a toll on torsion springs, rollers, and opener electronics in ways a mild coastal climate never will. Our Garage Door Repair team plans every Loomis call around those conditions.
When you call, you’re talking to a garage door specialist, not a dispatch center. Troy Winslow built All Star Garage Door Co to do one thing and do it completely: garage doors. Repair, openers, full installs. That’s it. So when a Loomis homeowner describes a door that groans at 6 a.m. or a shop door that hasn’t sealed right in two years, we know exactly what to bring on the truck.
Why All Star Garage Door Co Is Loomis’s Preferred Garage Door Repair Company
Homeowners in Loomis call us because we specialize exclusively in garage doors. Not plumbing, not HVAC, not general handyman work. Every part on our truck, every diagnostic step we take, every brand we carry knowledge on is focused on the door and opener attached to your house or shop. When a multi-bay door off King Road is fighting its opener, a generalist guesses. We know.
We work on equipment from LiftMaster, Chamberlain, Genie, Raynor, Clopay, Amarr, Wayne Dalton, and Craftsman. Whatever brand is on your door or opener, we know it. That matters here because Loomis properties are a mix of decades-old ranch doors and brand-new custom carriage doors on detached garages, and each one fails in its own way. We’ve seen the patterns.
Our customers across Loomis tell us the same thing: they want a technician who shows up knowing the terrain. Sierra foothill properties, long driveways, shop buildings set back from the road. We’ve navigated all of it. When you call (855) 684-6988, you get a straight answer about what’s wrong, what it costs, and when we can fix it. That’s the All Star standard. Troy Winslow expects every technician we send to perform at that level, not just some of the time.
Styles & brands we work with
Commercial Garage Door Repair in Loomis
Commercial garage door repair in Loomis means working on oversized doors that a standard residential crew would be under-equipped to handle, and it’s a service a lot of local property owners need without realizing it. On multi-acre horse properties and rural estates, the door on a detached shop or barn is functionally a commercial door: wider, heavier, and cycled less often until something finally gives. Repair work on these doors in Loomis runs $150 – $600 depending on what’s failed, with spring work at $180 – $340.
Detached Shop and Barn Doors
These are the jobs suburban repair companies rarely see. A 12-foot-wide sectional on a barn off Taylor Road carries hundreds of pounds, and its springs lose tension faster than a standard two-car garage door ever would. When those springs slack, the opener strains against the full weight of the door. That burns out motors, snaps cables, and rounds off gears. We diagnose the whole system, not just the symptom.
Low-Cycle, High-Stress Hardware
A shop door that gets opened a few times a week still sits in 100°F heat all summer and takes foothill wind all winter. Heat doesn’t care how often the door moves. It relaxes spring steel, hardens seals, and corrodes chains. The right fix means replacing worn parts with coated high-cycle springs, nylon rollers, and hardware that can take Loomis conditions, not just whatever’s cheapest.
Garage Door Cable Repair in Loomis
Garage door cable repair in Loomis is one of the most common calls we get from properties with detached garages and shop buildings, and it runs $130 – $250. Cables fail when springs lose tension, when rollers bind, or when a door has been limping along out of alignment for months. On oversized doors, a snapped cable is dangerous: the door can drop hard and fast.
Heat-Slacked Springs, Snapped Cables
A torsion spring that’s gone soft puts the cable under uneven load every time the door moves. Over a Loomis summer, springs on wide doors lose tension steadily. The cable frays, then lets go. We replace cables in pairs, set the tension correctly, and check the drum so the door lifts evenly on both sides.
Rusted Hardware on Detached Doors
Doors that sit unserviced for years on an outbuilding collect dust, moisture, and corrosion. Hinges bind. Rollers grind. Cables rust and start to unravel. When we replace cables on a Loomis shop door, we inspect the entire track and roller system while we’re there, because a new cable on corroded hardware is a short-term patch, not a fix.
Trusted Brands We Service in Loomis
We service doors and openers from LiftMaster, Chamberlain, Genie, and Raynor, among others. Brand-specific knowledge matters more than people think. A LiftMaster opener from 2012 fails differently than a Genie from 2018, and a Raynor door balances differently than a Clopay. Our technicians train across all of them, and we carry the parts on the truck to handle most repairs in a single visit to your Loomis property. No “we’ll order it and come back next week” unless it’s a full custom door panel. The right fix, not the most expensive one.
Common Garage Door Repair Problems We See in Loomis Homes
- Slack torsion springs on oversized doors: Foothill heat relaxes spring steel, and once a spring loses tension, the opener is carrying weight it was never designed for. On a 10- or 12-foot shop door, that’s 200 to 350 extra pounds fighting the motor.
- Corroded hinges and rollers on detached garages: Doors on outbuildings sit for months between uses. Hinges rust, rollers seize, and the door starts dragging. Left long enough, that strain snaps a cable or strips an opener gear.
- Weather seals that no longer seal: Heat hardens bottom seals, and dust from dry Loomis summers works its way into tracks and rollers. The door still opens, but it sits crooked and grinds, and the gap lets in everything from dust to foothill wind.
- Photo-eye sensors knocked out of alignment: Wide doors on rural properties flex more than suburban doors, and a door that’s off even a quarter-inch will trip the sensors and refuse to close. Recalibration usually fixes it in minutes.
See the difference
Before
After
Before
After
Before
AfterPricing for Garage Door Repair in Loomis, CA
Here’s what you can expect to pay for common repairs on this side of Placer County. These are the ranges we quote, and the price is agreed before any work starts. No surprises on the invoice.
| Service | Typical Loomis Price Range |
|---|---|
| Garage Door Repair | $150 – $600 |
| Spring Repair | $180 – $340 |
| Cable Repair | $130 – $250 |
| Track Realignment | $120 – $240 |
| Roller Replacement | $110 – $220 |
| Opener Repair | $120 – $320 |
What moves the number is the size of the door, the type of spring, and how long the problem has been developing. A neglected 12-foot barn door costs more to bring back than a standard two-car door caught early. Call (855) 684-6988 and we’ll give you a straight quote before we touch anything.
We Also Serve Cities Near Loomis
Our service area covers the foothill communities around Loomis, including Rocklin, Granite Bay, Newcastle, and Roseville. If your property sits between towns or out on a county road, check our Garage Door Repair in Loomis page or call us to confirm coverage. Chances are, we’re already working a property down the road from you.
Serving Loomis, CA — Our Local Coverage Area
We’re based in the Loomis area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Garage Door Repair in Loomis
Nine times out of ten on a Loomis shop door, it’s the spring. When a torsion spring slacks, the motor is trying to lift the full weight of a 150 – 350+ pound door, and it hums because it can’t. We diagnose the spring tension first, not the motor. If it is the motor, we repair or replace it. Call (855) 684-6988 and we’ll tell you exactly which one failed.
Heat. Loomis summers routinely exceed 100°F, and sustained heat relaxes spring steel over repeated cycles. Add a wider, heavier door on a shop or barn and the spring works under higher stress from day one. Most suburban doors use a 10,000-cycle spring; out here on oversized doors, a standard spring can wear out years sooner. We install coated high-cycle springs designed for these conditions.
Yes. Detached shop and barn doors are a major part of our Loomis work. These are wide, heavy doors that often haven’t been serviced in years, and they fail differently than standard residential doors. We carry parts sized for oversized doors and we’re used to working on properties set back from the road. Call (855) 684-6988 to schedule.
If the sensors are aligned and clean, the next culprit is usually the travel limit on the opener or the track itself. On a wide Loomis door, track flex or a loose bolt can shift alignment enough to stop the door short. The door thinks it’s reached the floor, but it hasn’t. That’s a quick calibration fix for us, typically $120 – $240 for track realignment.
Most repairs in Loomis land between $150 and $600. Spring repair runs $180 – $340, cable repair $130 – $250, roller replacement $110 – $220, and opener repair $120 – $320. The price depends on door size, part type, and how long the issue’s been developing. We quote before we start, every time. Call (855) 684-6988 for a free estimate.
Call All Star Garage Door Co for Loomis Garage Door Repair
If your garage door is grinding, sagging, or refusing to open, don’t wait for a cable to snap or a spring to let go. Call All Star Garage Door Co at (855) 684-6988 for a free estimate. We quote the price before any work starts, we arrive with the parts to handle most repairs on the spot, and we do it at the standard Troy Winslow expects from every tech we send. From a broken spring to a full new door, one call covers it.
Written by Troy Winslow, Owner at All Star Garage Door Co, serving Loomis and the surrounding foothill communities.