Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateFast, Reliable Garage Door Repair Across Parkway
Garage door repair in Parkway typically costs $150 – $600, with most mechanical fixes like spring or cable work landing between $180 and $340. We work these blocks off Franklin Boulevard every week, so we know the streets, the alleys, and the older doors that Parkways homes still run. If your door is stuck, sagging, or making noise it shouldn’t, call (855) 684-6988 and we’ll walk you through what’s likely happening before we even roll the truck.
Most Parkway homes were built between the 1950s and 1980s, and a lot of them still have the original garage door hardware. That’s not a knock on the neighborhood. Those old wood and early steel doors were built to last. But torsion springs have a service life, cables fray, and chain-drive openers that have run for 40 years don’t owe anyone anything. When they fail, they tend to fail all at once, usually with a car inside the garage. We get it. We live for this work.
Why All Star Garage Door Co Is Parkway’s Preferred Garage Door Repair Company
We specialize exclusively in garage doors. That’s the whole business. No plumbing, no HVAC, no handyman side work. Every van we send into Parkway carries garage door parts, not a grab bag of home repair supplies. The tech who shows up at your door has spent their entire workweek thinking about torsion springs, cable drums, track alignment, and opener logic boards. That focus matters when you have a 50-year-old wood panel door sitting half-open on a shared driveway.
Parkway homeowners call us because the problem gets diagnosed correctly the first time. A door that won’t lift might be a broken spring, or it might be a chain-drive opener that’s been straining against rusted rollers for two years and finally gave out. Those are two different fixes with two different price tags. We tell you which one you actually have. Troy Winslow, who leads our team, insists on that standard. The right fix, not the most expensive one. That’s how we’ve built our reputation around here.
Styles & brands we work with
Emergency Garage Door Repair in Parkway
Emergency Garage Door Repair in Parkway usually means one of three things: a snapped torsion spring, a cable that jumped the drum, or an opener that died with the door down and a car trapped inside. On narrow Parkway driveways, this is especially frustrating because you often can’t get the second car out around the first one. We prioritize these calls from 95823 and get to them as quickly as the schedule allows.
A spring replacement in Parkway runs $180 – $340. Cables are $130 – $250. If the opener is the culprit, repair is $120 – $320. We quote the job before we touch anything, and the price you agree to is the price you pay. No surprise line items after the fact. You’ll know the number before we start.
Spring Failures on Legacy Doors
Original torsion springs on 1960s and 70s doors snap most often after a long Sacramento summer. Extreme heat causes metal fatigue over time, and then one cold winter morning the spring lets go with a sound like a gunshot. When that happens on an alley-access garage, the door often stays where it stopped, which is rarely convenient.
We replace springs in pairs even when only one broke. They wear evenly, and if one just gave out, the other isn’t far behind. Pair replacement is $180 – $340, and it’s the smarter long-term fix.
Opener Overheating from Strained Doors
Older chain-drive openers in Parkway get asked to do too much. A door that’s out of balance because of a weak spring or swollen wood panels makes the opener work twice as hard. In summer, that translates to thermal shutdowns, fried circuit boards, and a door that stops mid-cycle.
If your opener is overheating, we check the door’s balance first. Fixing the mechanical problem often saves the opener. An opener repair runs $120 – $320. If the logic board is cooked, we’ll tell you straight and give you a replacement price on the spot.
Garage Door Panel Replacement in Parkway
Garage Door Panel Replacement in Parkway is common on older wood doors that have absorbed decades of winter rain and summer heat. Wood panels swell, bow, and split. Early steel panels dent and rust through. When a panel is damaged badly enough, replacing it is faster and cheaper than trying to patch a door that’s already past its prime.
Panel replacement runs $250 – $500 per panel in Parkway. If the door is a one-piece design, the math changes because the whole face is a single panel, but we’ll walk you through what makes sense. We match panel profiles when we can, and when we can’t, we’ll tell you before ordering anything.
Wood Panel Rot and Swelling
Sacramento’s wet winters soak into old wood panels, and the dry summer bakes them. Over 30 or 40 years, that cycle causes visible rot at the bottom edges and swelling that makes the door bind in the tracks. Parkway’s original wood doors from the 1960s and 70s are especially prone to this.
Swollen panels often stop the door from closing all the way, which is a real security issue. Replacing the affected panels gets the door square and sealing again without the cost of a full new door.
Steel Panel Dents and Rust
Early steel doors from the 80s are tough but not indestructible. A car bumper at the wrong angle or a bicycle leaning into the door for years leaves dents. River-adjacent humidity in the valley accelerates rust on panels that have scratched paint.
A replacement panel gives the door years of extra service for a few hundred dollars. It’s one of the best value repairs we do in Parkway.
Trusted Brands We Service in Parkway
We work on LiftMaster, Chamberlain, Genie, and Clopay among others. Whatever brand is on your door or opener, we know it. Our techs carry parts for the openers we see most often in Parkway homes, including the older chain-drive models that are still everywhere in this neighborhood. We can usually complete opener and spring repairs in a single visit because the parts are on the truck. Garage Door Repair is all we do, so our inventory is deep, not scattered across three trades.
See the difference
Before
After
Before
After
Before
AfterCommon Garage Door Repair Problems We See in Parkway Homes
- Snapped original torsion springs on 1960s – 80s doors. At the end of a hot Sacramento summer, these springs are at their breaking point. When they go, the door won’t lift, and with a one-car garage, the car is usually stuck inside.
- Rusted steel tracks and swollen wood panels from winter dampness. The valley’s wet months add moisture that old doors weren’t designed to shed forever. Tracks rust, rollers bind, and chain-drive openers strain and overheat trying to move a door that no longer glides.
- Missing photo-eye safety sensors. A large share of original Parkway doors have no safety sensors at all. The photo-eye wasn’t required until the early 1990s, so pre-90s doors often fail a basic safety check. We can retrofit sensors on nearly any door.
- Worn rollers and dried-out weather seals. Nylon rollers lose their bearings, steel rollers wear flat spots, and the bottom seal cracks to let in rain, dust, and heat. On tight Parkway driveways, a rattling door grinding against a neighbor’s car is a problem nobody wants.
Pricing for Garage Door Repair in Parkway, CA
Here’s the straight answer on what garage door work costs in Parkway. Spring repair runs $180 – $340. Cables are $130 – $250. Track realignment is $120 – $240. Roller replacement is $110 – $220. Panel replacement is $250 – $500. Opener repair is $120 – $320. A full garage door repair job typically lands somewhere between $150 and $600.
| Service | Price Range in Parkway |
|---|---|
| Spring Repair | $180 – $340 |
| Cable Repair | $130 – $250 |
| Track Realignment | $120 – $240 |
| Roller Replacement | $110 – $220 |
| Panel Replacement | $250 – $500 |
| Opener Repair | $120 – $320 |
| Garage Door Repair | $150 – $600 |
Every quote is written before work begins. You’ll see the exact number, agree to it, and never get a surprise invoice afterward. Call (855) 684-6988 for a free estimate.
We Also Serve Cities Near Parkway
Our Garage Door Repair in Parkway service area includes the surrounding south Sacramento communities. We regularly work in Florin, Fruitridge Pocket, Laguna, and Elk Grove, so if you’re just outside Parkway, give us a call. The same team, the same truck stock, the same straight pricing.
Serving Parkway, CA — Our Local Coverage Area
We’re based in the Parkway area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Garage Door Repair in Parkway
Repair is almost always the answer unless the door is structurally failing. Springs, cables, rollers, and tracks can all be replaced for a few hundred dollars, which buys years of service on a door that’s already outlasted most of what’s sold today. We’ve retrofitted photo-eye sensors and modern safety hardware onto dozens of original Parkway doors. The honest advice is to repair what’s broken and only replace the door when the panels themselves are shot. We’ll tell you which one you’re looking at.
Because the door itself is fighting the opener. When springs weaken, panels swell, or tracks are out of alignment, the opener has to work harder to move the same weight. In 100°F heat, the motor overheats and shuts down. Fix the mechanical problem on the door, and the opener usually stops struggling. That diagnosis plus an opener repair runs $120 – $320 in Parkway. Call (855) 684-6988 and we’ll sort it out.
Yes. This is one of our most common retrofits in Parkway. Doors built before the early 1990s have no photo-eye sensors, which means they won’t stop if a child or pet crosses the beam path while the door is closing. We can add a sensor pair to nearly any door, old or new, and route it into your existing opener logic. It’s a simple upgrade that makes a genuinely unsafe door safe.
Carefully. Most Parkway garages open onto a short shared driveway or an alley, and there’s often a car parked within arm’s reach of the door. Our techs are used to working in tight clearance, wedging ladders in where there’s just enough room, and doing spring and cable work without needing a wide-open work zone. We’ve done it hundreds of times on these exact blocks, and we’ll tell you upfront if a job needs more room to be done safely.
We stock and order parts for old doors all the time. Springs, cables, rollers, hinges, and weather seals for legacy doors are available to us, and we’re not in the business of pushing a $2,000 door replacement when a $200 repair solves the problem. If the door is genuinely past saving, we’ll show you why with specific damage, not vague warnings. The right fix, not the most expensive one. Call (855) 684-6988 for an honest assessment.
Written by Troy Winslow, Owner at All Star Garage Door Co, serving Parkway since our first service call here.