Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Installation Cost in Roseville?
New garage door installation in Roseville typically costs $700 to $2,200 for the door and hardware, and most single-car replacements land around $950 to $1,400 with a standard opener added. That range covers the full job: hauling away the old door, new tracks and springs, and a working system when we leave. A single-car door with basic steel panels sits at the low end; a double-car door with insulated panels, windows, and a new belt-drive opener pushes toward the top.
We’re All Star Garage Door Co, and garage doors are the only thing we work on. When we quote a Roseville install, you get a real number tied to your opening, your door style, and how much of the existing hardware can stay. Call (855) 684-6988 for a free estimate, and we’ll tell you where your project lands before anyone touches a track.
Key Takeaways
- Most Roseville garage door installs run $700 to $2,200, with typical single-car jobs near $950 to $1,400.
- Insulated, double-car, and carriage-style doors push cost up; a straight swap of a same-size door keeps it down.
- Roseville’s hot, dry summers and cool winters affect spring and seal life, so material choice matters more here than in mild climates.
- Reusing a working opener and healthy hardware can trim a few hundred dollars off the job.
- Free estimates from a dedicated garage door specialist give you an exact figure. Call (855) 684-6988.
Garage Door Installation Cost Breakdown (2026)
Here’s how the dollars break down for a Roseville install. These are market ranges for 2026, and we’ll give you your exact number when we see the opening.
| Line Item | Typical Cost in Roseville |
|---|---|
| New door installation (full job) | $700 – $2,200 |
| Opener installation (added to job) | $250 – $550 |
| Panel replacement (if only sections are damaged) | $250 – $500 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| Spring repair (if springs fail during the swap) | $180 – $340 |
| Cable repair | $130 – $250 |
| General garage door repair | $150 – $600 |
| Opener repair (keep your existing unit) | $120 – $320 |
What drives the number up or down? Door size is the big one. A single-car door is roughly half the material of a double-car, and that gap shows up directly in the quote. Insulation is the next lever: a non-insulated steel door keeps the price down, while a double-layer or fully insulated door costs more but holds up better against Roseville heat and helps with the noise if a bedroom sits over the garage. Windows, carriage-style overlays, and premium finishes add to the top line. On the flip side, if your existing tracks, springs, and opener are in good shape, you may only pay for the door and labor, which drops you toward the $700 to $950 end. Opener brand matters too: we work on LiftMaster, Chamberlain, Genie, Craftsman, Clopay, Amarr, Wayne Dalton, and Raynor, so whatever brand you already own, we can usually keep it rather than sell you a replacement. That’s the difference between a specialist and a company that only stocks one brand.
What Affects Garage Door Installation Pricing in Roseville
- Door size and material. Single-car versus double-car, steel versus wood-look composite, framed windows or not: each choice moves the price, and the door itself is usually the biggest line item on the job.
- Insulation and climate. Roseville summers push triple digits and winters dip near freezing, so an insulated door pays back over time in a quieter, more stable garage. We regularly see non-insulated doors in older Roseville neighborhoods like Folsom Ranch and Highland Reserve warp and rattle more after a few hot seasons.
- Track and framing condition. If the opening is square and the existing framing is solid, installation is straightforward. A cracked jamb or out-of-square opening adds labor, which is common in homes built in the 1980s and 1990s around Stoneridge and Maidu.
- Opener age and brand. Reusing a healthy LiftMaster or Chamberlain opener saves the most. If your opener is old or fails during the swap, adding a new one lands in the $250 to $550 opener installation range.
- Which brand you choose. Clopay, Amarr, Wayne Dalton, and Raynor all price differently for similar specs, and we can walk you through where the value sits for your house rather than steering you to one brand.
- Permits and HOA rules. Some Roseville HOAs and newer developments have design standards for door color and style. Checking those before ordering avoids a costly re-order.
How to Save on Garage Door Installation
You don’t need to cut corners to control cost. A few moves make a real difference.
- Keep what’s healthy. If your opener and hardware are in good shape, a door-only install is cheaper than a full replacement. We’ll tell you honestly which parts are worth keeping.
- Time the job before a failure. Replacing a worn door on your schedule beats an emergency repair once a spring snaps or a panel buckles. Check our Garage Door Installation in Roseville page for what’s involved in planning a replacement.
- Choose the right insulation level. Full insulation is great, but not every garage needs it. Match the door to how you actually use the space.
- Bundle opener service with the install. If your opener is near the end of its life, replacing it during the door install saves a separate service call.
- Ask for a free estimate and a clear itemized quote. Knowing the door price, the hardware, and the labor separately keeps you from overpaying for anything.
Every All Star estimate is free, and we’ll put the numbers in writing so you can compare. Call (855) 684-6988 to schedule yours. While you’re at it, our team handles Garage Door Spring Repair in Roseville and can check your existing springs during the visit, since those are the parts that fail most often and they carry the highest risk if they let go.
Repair vs. Replace: Which Makes Sense for Your Roseville Home?
If your door still opens and closes but looks tired, a repair or partial swap often beats a full install. The math usually looks like this:
- One or two damaged panels: panel replacement runs $250 to $500. Cheaper than a new door if the rest is solid.
- Off-track or noisy door: track realignment ($120 to $240) or roller replacement ($110 to $220) usually fixes it.
- Spring or cable failure: spring repair runs $180 to $340, cable repair $130 to $250.
- Door itself is old, sagging, or out-of-style: a full install at $700 to $2,200 is the better spend.
We take the honest route here. If a repair will give you several more good years, that’s what we’ll recommend, not a replacement that pads the invoice. Garage door springs and cables are under serious tension and can cause real injury if handled wrong, so we don’t suggest DIY on those; a trained technician should handle them every time. If a repair turns out to be more than a patch, we can fold the work into a full installation so you’re not hiring a second contractor. You can also read about Garage Door Repair in Roseville if your door is mostly sound and just needs a fix.
Why a Dedicated Garage Door Specialist Keeps Your Cost Honest
A general handyman can hang a door, but garage doors have their own springs, tracks, and tension systems, and the wrong install shows up fast: a door that binds, a spring sized wrong, an opener fighting a heavier door. We specialize exclusively in garage doors, and that focus means our technicians know how to set up a LiftMaster, Chamberlain, Genie, or Craftsman opener to match whatever door we install, and how a Clopay, Amarr, Wayne Dalton, or Raynor door behaves over time. The right fix, not the most expensive one, is the standard we work to. If you want the fuller picture of what we handle, start at our home page.
We cover the whole spectrum in Roseville: mechanical repair, opener repair, and new door installation. So if your project starts as a repair and turns out to need a new door, one call covers it. That includes Garage Door Opener Repair in Roseville and Garage Door Opener Installation in Roseville, plus Garage Door Cable Repair in Roseville when a cable is the weak link. Homeowners nearby in Rocklin, Granite Bay, Lincoln, and Citrus Heights get the same specialist service, and we also handle Garage Door Panel Replacement in Roseville when a full door isn’t needed.
FAQs – Garage Door Installation Cost
How much does garage door installation cost in Roseville?
Garage door installation in Roseville runs $700 to $2,200, with most single-car jobs landing around $950 to $1,400 once you factor in the door, hardware, and setup. Double-car and insulated doors push toward the top of the range. Call (855) 684-6988 for an exact quote; estimates are free.
Is it cheaper to repair or replace a garage door in Roseville?
Repair is cheaper when the door is sound and the problem is a panel, track, roller, or spring. Panel replacement costs $250 to $500 and general repair $150 to $600, versus $700 to $2,200 for a full install. If the door is sagging, rusted through, or out of style, replacement makes more sense. We’ll give you the honest call. Call (855) 684-6988 for a free estimate.
Can you install a garage door the same day in Roseville?
Same-day installation depends on whether we have your door size and style in stock. A basic steel door in a common size is often available quickly; special-order insulated or carriage-style doors take longer. Call (855) 684-6988 and we’ll tell you what’s realistic for your door.
How much does a new garage door add to home value in Roseville?
A new garage door is one of the higher-return exterior upgrades a Roseville homeowner can make, often recouping a large share of its cost at resale because buyers notice curb appeal first. Exact returns vary by neighborhood and door style. Call (855) 684-6988 to talk through options that fit your home and budget.
Do I need a new opener when I install a new door?
Not always. If your existing opener is a healthy LiftMaster, Chamberlain, Genie, Craftsman, or other major brand, it can often stay. A new opener installation adds $250 to $550 if yours is old or undersized for the new door. We’ll check yours during the estimate. Call (855) 684-6988 to schedule.
Pricing reflects the Roseville market as of 2026. All Star Garage Door Co offers free estimates – call (855) 684-6988.
What Our Customers Say
"Spring snapped at six in the morning with my car sealed inside and me due at work. Somebody was here by eight thirty with the right spring on the truck. Door's quieter now than it was before it broke."
— Elena Mendoza"Keypad stopped working, which I assumed meant a whole new system. It was the batteries and a reprogram. He charged me the minimum service call and told me how to do it myself next time."
— Jessica Yang"Opener works, remotes are programmed, no complaints on the work. Took three days to get on the schedule though, so if you've got a car trapped inside, say so when you call."
— Rachel Barrett