Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateGarage Door Company in Granite Bay, CA
Granite Bay homeowners call us most often for garage door installation, and the reason is usually the same: these aren’t standard doors from a builder’s bulk order. Most homes here are custom builds from the 1980s through 2000s on half-acre or larger lots, with oversized double doors, carriage-house wood, and openers working harder than average. We’re All Star Garage Door Co, and we specialize exclusively in garage doors, which means the quirks of Granite Bay construction are what we deal with every day. If you’re weighing a new door or an upgrade, call (855) 684-6988 for a free estimate, quoted before any work begins.
Why Granite Bay Homes Are Different
Granite Bay sits in the Sierra foothills, and that elevation shapes how garage doors behave here. Summers are hot and dry, winters mild but wet, and the temperature swings do measurable things to door hardware. Wood doors, which are common on the custom homes in this area, swell with winter damp and stick in their frames. By summer, that same wood dries out and can warp or crack. Steel doors don’t escape either: thermal expansion loosens hinges and track bolts over time, and a door that was perfectly balanced in October can be dragging by June.
The housing stock compounds it. These are mostly large custom single-family homes with three- and four-car garages, plus detached workshops on many properties. Doors are frequently 16-foot doubles, sometimes RV-height, and often built from carriage-house wood or full-view glass. Those are heavier, more expensive, and less forgiving of sloppy installation than a standard suburban steel door. Add in long driveways, gated entries, and septic-and-well lots with unpaved or circular drives, and you have a service environment where the technician’s first challenge is often just getting positioned, before any hardware comes off the truck. Spring failures also spike here after the first heavy winter rains, when wooden doors absorb moisture and become bottom-heavy, which overloads torsion springs that were already aging.
Styles & brands we work with
Our Main Granite Bay Services
Most Granite Bay homeowners reach out to us for one of two reasons: a door that’s no longer working, or an opener that has quit responding. Both are covered below with dedicated pages for the details.
Garage Door Repair in Granite Bay
Garage door repair here tends to be mechanical, not cosmetic. Broken torsion springs, snapped cables, rollers that have lost their bearings, and tracks knocked out of alignment by years of thermal expansion. On Granite Bay’s oversized doors, these parts are under more load than they would be on a standard tract-home door, which means a spring rated for a lighter door simply won’t last. We stock or can source the right parts for 16-foot and RV-height doors, and we work on wood, composite, and steel carriage doors alike. If your door is heavy, making noise, or sitting crooked, read more on our Garage Door Repair in Granite Bay page.
Garage Door Opener Repair in Granite Bay
Opener repair in Granite Bay often comes down to load. The openers on these homes are frequently paired with heavy wood or full-view glass doors, and when the door’s balance is off by even a small amount, the opener’s motor, gears, and circuit board absorb the strain. We service LiftMaster, Chamberlain, Genie, and Craftsman openers, and we typically start by checking whether the door itself is balanced before assuming the opener is at fault. That sequencing saves Granite Bay homeowners from replacing openers that weren’t the real problem. For the full breakdown, see our Garage Door Opener Repair in Granite Bay page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Garage Door Installation in Granite Bay
New garage door installation in Granite Bay is where the custom housing stock really matters. Most homes here were built between the 1980s and early 2000s, and the original doors are now 20 to 40 years old. Wood doors have been through dozens of wet-dry cycles, composite doors have faded, and steel doors show the effects of foothill temperature swings. Installing a new door on these homes means working with larger openings, heavier panels, and homeowners who expect carriage-house wood or full-view glass rather than a basic steel slab. We measure, order, and install to fit the existing opening and the home’s architecture, and we’ll quote the full job before any work starts. For more on the broader service, see Garage Door Installation.
Garage Door Replacement
Signs you need it
Your existing door has split wood panels, rust-through on steel sections, or a frame that no longer sits square in the opening.
What it costs in Granite Bay
Full garage door replacement in Granite Bay typically runs $700 – $2200 depending on door size, material, and whether the old door and opener are being reused.
How we do it
We remove the old door and hardware, inspect the opening and framing, then install the new door, tracks, springs, and weather seal, testing the full cycle before we leave.
Garage Door Installation Service
Signs you need it
You’re building a new garage, converting a carport, or replacing a door so damaged that track and spring work won’t save it.
What it costs in Granite Bay
A complete new door installation in Granite Bay falls between $700 and $2200, with the higher end reflecting 16-foot or RV-height carriage-house doors.
How we do it
We take precise opening measurements, order the door to spec, then install the panels, tracks, torsion springs, and any new opener, followed by balance and safety testing.
Garage Door Seal Installation
Signs you need it
You can see daylight under the door, feel drafts in the garage, or find leaves and dust blowing in from the driveway.
What it costs in Granite Bay
Garage door seal installation in Granite Bay is part of panel or full-door work and typically runs $250 – $500 when done as a panel replacement, or as part of a new door install in the $700 – $2200 range.
How we do it
We replace the bottom seal, the side and top weatherstripping, and any threshold where needed, sized to the door and checked for a clean close against the concrete.
What Garage Door Installation Costs in Granite Bay
| Item | Typical range in Granite Bay |
|---|---|
| New door installation (full) | $700 – $2200 |
| Panel replacement | $250 – $500 |
| Track realignment (if needed with install) | $120 – $240 |
Two local factors push Granite Bay installation pricing toward the upper part of those ranges: oversized openings (16-foot doubles and RV-height doors) and the premium materials common here, particularly wood and full-view glass. We quote the full installed price before any work starts, so you won’t find a surprise on the invoice.
How long does a garage door installation take in Granite Bay?
A standard single or double door installation is usually a full-day job. Custom doors on Granite Bay’s larger openings, especially wood or glass, can take longer because panels are heavier and need more careful handling.
Can you replace just the panels on a Granite Bay home?
Yes, if the track and springs are still sound. Panel replacement runs $250 – $500 and is common when one section is damaged but the rest of the door has life left. We’ll tell you if a full replacement is the better spend.
Brands We Service in Granite Bay
We work on Raynor, LiftMaster, Chamberlain, and Genie equipment daily, and we carry or can quickly source parts for all of them. In Granite Bay, where openers are often paired with heavy custom doors, knowing each brand’s load limits and circuit quirks means faster diagnoses and fewer return trips. See our brands for the full picture.
See the difference
Before
After
Before
After
Before
AfterPricing for Garage Door Company in Granite Bay, CA
| Service | Typical range in Granite Bay |
|---|---|
| Garage door repair | $150 – $600 |
| Spring repair | $180 – $340 |
| Cable repair | $130 – $250 |
| Opener repair | $120 – $320 |
| Opener installation | $250 – $550 |
| Panel replacement | $250 – $500 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| New door installation | $700 – $2200 |
In Granite Bay, prices run toward the upper end of these ranges when doors are oversized or built from wood and glass, because parts are heavier and labor is more involved. Whatever the job, we quote a fixed price before work starts, so the number you approve is the number you pay.
Neighborhoods We Serve in Granite Bay
We cover all of Granite Bay’s 95746 ZIP code, from the lake-adjacent streets to the hillier lots further east. Most calls in this area are within a short drive of Doug Vernon Drive or East Roseville Parkway, and we schedule around gates, long drives, and unpaved approaches without making a fuss about it.
- Treelake
- Oliver’s Ridge
- Hidden Lakes Estates
- Cavitt Ranch
- Folsom Lake Estates
Service Area – Cities Near Granite Bay
All Star Garage Door Co serves Granite Bay and the surrounding foothill communities. If you’re just over the line, we also cover Orangevale, CA, Loomis, CA, Folsom, CA, and Rocklin, CA. Same crew, same garage-door-only focus, same upfront pricing.
Serving Granite Bay, CA — Our Local Coverage Area
We’re based in the Granite Bay area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Garage Door Company in Granite Bay
We schedule service calls across the 95746 ZIP throughout the week. For broken springs or a door stuck open, we treat it as a priority and will give you the earliest available window when you call, then show up at that time.
Some Granite Bay neighborhoods have architectural review requirements for exterior changes, and a garage door is an exterior change. We’ll install the door you’ve approved with your HOA, and if you’re unsure, we can note what’s being done so you can check first.
Yes. Many Granite Bay properties have gates, circular drives, or unpaved sections, and we’re used to it. Just let us know when you book so we arrive prepared to get the truck close without damaging landscaping or the drive.
If you’re in Granite Bay and your garage door needs a specialist, call (855) 684-6988. We’ll give you a straight answer and a free estimate before any work begins.
What happens when you call
- 1A real person answersNo phone trees — talk to a local garage door pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Granite Bay Customers Say
"Both cables had come off the drum and the door was hanging crooked. I'd watched a video and was about ten minutes from trying it myself, which the tech told me would have been a genuinely bad idea. Glad I called."
— Priya Patel"Spring snapped at six in the morning with my car sealed inside and me due at work. Somebody was here by eight thirty with the right spring on the truck. Door's quieter now than it was before it broke."
— Elena Mendoza"Keypad stopped working, which I assumed meant a whole new system. It was the batteries and a reprogram. He charged me the minimum service call and told me how to do it myself next time."
— Jessica Yang