Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateFast, Reliable Garage Door Repair Across Glendale
Garage door repair in Glendale typically runs $150 – $600, and most jobs we handle are completed the same day we arrive. Glendale’s mix of pre-war bungalows, mid-century hillside ranches, and sloped foothill lots means doors here face a specific set of problems: settling slabs throw tracks out of square, tight carports limit opener options, and intense valley sun warps aging wood panels. We know these doors because we work on them every week. If your door is dragging, binding, or refusing to open, call (855) 684-6988 and we’ll get a technician to your Glendale home quickly.
Why All Star Garage Door Co Is Glendale’s Preferred Garage Door Repair Company
We specialize exclusively in garage doors. That’s not a slogan, it’s the entire business model. While general contractors split their attention across plumbing, electrical, and a dozen other trades, our technicians spend every working hour diagnosing and fixing garage doors. For a Glendale homeowner with a 1940s Spanish Colonial door that’s been re-tracked twice or a 1960s opener that’s finally given up, that focus matters.
Glendale customers have come to expect a few things from us: technicians who arrive knowing the difference between a spring problem and a track problem on a sloped driveway, trucks stocked with parts that fit older and newer doors alike, and a straight answer about what’s worth repairing versus replacing. Our work spans the full range of what a garage door needs: mechanical repair, opener repair, and new door installation. From a broken spring to a full new door, one call covers it.
Troy Winslow leads our service team with a simple rule: the right fix, not the most expensive one. Whatever brand is on your door or opener, we know it.
Styles & brands we work with
Garage Door Cable Repair in Glendale
Garage Door Cable Repair in Glendale is one of the most common jobs we run in the hill neighborhoods. A cable snaps under tension, the door drops crooked on one side, and suddenly the whole system is fighting itself. On the sloped driveways you find in Chevy Chase or Verdugo Woodlands, a snapped cable is especially dangerous because gravity is already working against the door. In Glendale, cable repair typically runs $130 – $250.
When a cable fails, we don’t just swap in a new one and call it done. We check the drum, the torsion spring, and the track alignment. On a settled slab, a new cable on an out-of-square frame will fail again in months. The repair has to account for why the cable let go in the first place.
When a frayed cable is a warning sign
If you see loose strands poking out of a cable near the drum, don’t wait for the snap. That fraying is metal fatigue, and under full tension a failing cable can lash when it breaks. Call us before the door comes down hard.
Why Glendale hillside doors wear cables faster
A door that’s slightly out of level fights its cables with every cycle. In a flat valley floor, that strain builds slowly. On a Glendale hillside lot where the slab has shifted, it builds faster. We see this pattern constantly in the Verdugo foothills.
Garage Door Spring Repair in Glendale
Garage Door Spring Repair in Glendale costs $180 – $340, and it’s the repair you should never postpone or attempt yourself. Torsion springs hold hundreds of pounds of tension. When one breaks, the door becomes dead weight. In Glendale, where so many homes have original single-car doors on steep driveways, a broken spring often means a door that slams or refuses to stay open.
We replace springs by cycle rating, not by guess. A standard spring lasts about 10,000 cycles. A door that opens four times a day hits that in under seven years. For Glendale homeowners who use the garage as the primary entry, a high-cycle spring rated for 20,000 or more cycles is often the smarter money.
High-cycle springs for doors that work hard
If your garage is the front door of the house, tell us. We’ll size the spring for how you actually use the door, not for what the builder assumed in 1962.
Two springs, not one
Double-wide doors in Glendale’s mid-century ranches usually run on two springs. When one breaks, we replace both. The second one has the same age and the same fatigue. Replacing one just means another service call in six months.
Trusted Brands We Service in Glendale
Our technicians are trained and equipped to work on products from LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. That multi-brand coverage matters more in Glendale than in a newer subdivision where every house has the same builder-door. Here, a 1920s bungalow next to a 1960s rancher next to a recently flipped townhome means three different eras of hardware on one block. We know the Chamberlain and Genie openers found in the mid-century homes, and the Clopay and Amarr doors common on newer replacements. Whatever brand is on your door or opener, we know it, and we stock common parts for Glendale jobs right on the truck.
See the difference
Before
After
Before
After
Before
AfterCommon Garage Door Repair Problems We See in Glendale Homes
- Out-of-level tracks from settled slabs. Glendale’s foothill neighborhoods sit on ground that shifts. A slab that settles a half inch in Chevy Chase can throw a track out of square enough to make the door bind every cycle.
- Low-headroom carports with standard openers shoehorned in. South Glendale’s tight carports often have doors that need low-clearance kits or torsion conversions. A standard rail simply won’t fit, so we see a lot of retrofit work here.
- Old wood doors swelling in winter rain. A 1930s wood door absorbs winter moisture, swells, and throws off the balance. In summer, valley heat bakes it dry and warps the panels. Glendale’s climate punishes old wood doors from both directions.
- Openers straining against heavy, unbalanced doors. An opener motor works harder than it should when the door it’s lifting is out of balance. We see this daily in Glendale: a door that’s too heavy, an opener that’s burning out, and a homeowner who’s been told they need a whole new system when they don’t.
Pricing for Garage Door Repair in Glendale, CA
We believe in telling you the price before we start the work, and we hold to that quote. Here’s what Glendale homeowners can expect:
| Repair Type | Typical Glendale Range |
|---|---|
| Spring Repair | $180 – $340 |
| Cable Repair | $130 – $250 |
| Track Realignment | $120 – $240 |
| Opener Repair | $120 – $320 |
| Opener Installation | $250 – $550 |
| Garage Door Repair (general) | $150 – $600 |
The range reflects the difference between a simple roller swap and a full track re-square on a settled hillside slab. We give you a written price before any work begins, and that price doesn’t change when we see the door up close. Estimates are free. Call (855) 684-6988 to book one.
We Also Serve Cities Near Glendale
Our Garage Door Repair service regularly covers Glendale and the surrounding communities: Burbank, La Cañada Flintridge, La Crescenta-Montrose, and Universal City. The same technicians, the same trucks, the same straight pricing, no matter which side of the 134 you’re on.
Serving Glendale, CA — Our Local Coverage Area
We’re based in the Glendale area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Garage Door Repair in Glendale
Usually it’s a track problem first, and a spring problem second. When a slab settles on a sloped Glendale lot, the track loses square and the door starts to drag. That drag then overloads the spring until it fatigues. We’ll re-square the tracks to the settled slab, check spring balance, and replace any components that the strain already damaged. Call (855) 684-6988 and we’ll diagnose it straight.
Yes. South Glendale carports are notoriously tight, and we install low-clearance opener kits and side-mount jackshaft openers that fit where a standard rail won’t. The key is measuring the actual headroom and the door’s travel path before choosing the opener. We do that as part of every install quote, and the price is set before we start work.
If your garage door is the main entry to your house, or you open it more than four or five times a day, a standard spring will fail quickly. The high-cycle spring costs a bit more up front and lasts two to three times longer under heavy use. We’ll tell you which spring your usage pattern calls for, not just which one is cheaper to install today. Get an exact quote by calling (855) 684-6988.
Wood absorbs moisture and expands, and a door that fit fine in October can bind against the frame in January. In Glendale’s climate, the same door then bakes in summer heat and warps the opposite direction. We can realign, sand-to-fit, and reseal the door to handle those swings, or we can show you what a modern Clopay or Amarr replacement would cost. Either way, you’ll know exactly what the numbers are before you decide.
Not necessarily. The opener might be fine and the door might be out of balance, which forces the motor to work like it’s lifting twice the weight. We’ll test the door’s balance first. If the door balances and the opener still struggles, the motor or gear is the problem. If the door won’t balance, fixing the spring or track is the actual repair. We’ll show you which one it is. Estimates are free at (855) 684-6988.
Written by Troy Winslow, Owner at All Star Garage Door Co, serving Glendale and surrounding cities with dedicated garage door expertise.